802.3bt PoE Switch is an advanced device to grant 60W-90W power supply and stable gigabit network for various IP devices in an economic but efficient way.
TUsing this device in any applications that require PoE or fiber connection, especially for enterprise with specific high power supply needs in the whole PoE network system. Easy installation, IEEE 802.3bt standard and PoE transmission offer you great security and convenience.
The 802.3bt PoE Switch equips with 8 10/100/1000Mbps RJ45 ports and 2 Gigabit SFP ports, port 1-6 support PoE output, so power and data can be transmitted to up to 6 PoE IP devices. Besides, among these 6 ports, port 1-2 support IEEE 802.3bt standard compliant powered devices with a maximum of 90W output voltage per port. It is an ideal choice for enterprises to create an integrated data, voice, and powered network system that contains different power consumption IP devices, such as IP camera, IP phone, high power wireless AP or LED lighting, etc. Equiped with 2 Gigabit SFP ports, providing fiber optic link to satisfy your demand for long distance IP devices deployment.
This is a toggle switch complied with 3 level of IEEE802.3bt standard high power supply, including BT/higher power PoE; 4PPoE/UPOE; Legacy BT, saving cost and time on saperate high power terminal deployment and extra PoE injector installation for enterprises, providing high performance network and stable transmission as well as safe operation. The switch features plug and play installation with easy configuration, and PoE connection via single Ethernet cable can help eliminate dedicated AC power source close to IP powered device, which is well sutable for deployment at location where hard to find AC outlets.
Compliant with IEEE 802.3bt/at/af PDs, the switch supplies up to 90W or 30W per port and automatically detects PoE devices and their power class to simplify your infrastructure. This switch seamlessly receives and routes traffic at its non-blocking rate.
Communication link detection prevent all the PoE ports of the PoE switch from being active at the same time. The switch features surge protection and carrier grade electrical protection to protect from various power surges.
How it Works
- Single port output power up to 90W
- 10/100/1000 Mbps PoE RJ45 port & Gigabit SFP port
- Provide power and data connection for 4 PoE IP devices.
- Support standard PoE++, PoE+ ,PoE
- Provide flexible fiber optic link
- Auto detect power device
- Easy plug and play connection
- Operating temperature: 0℃~40℃
- Enhanced surge protection
- Dimensions: 220*150*44mm
- Click here to open Datasheet in PDF
(6) 10/100/1000 Mbps PoE Ports
(2) 1 Gbps dedicated RJ45 Ethernet Ports
(2) 1 Gbps dedicated SFP Ethernet Ports
PoE Standard: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, Legacy Bt, UPoE
Switching Capacity: 20Gbps
Forwarding Rate: 13.39Mpps
MAC Address Table: 4K，Automatic study, automatic updates
Jumbo frame: 9216 Bytes
Packet buffer: 1.5M bit
Power Method: 100-240VAC/50-60 Hz, Universal Input
Power Supply: AC/DC, Internal, 190W DC
PoE budget: 180W
LEDs Per Port: PWR, LNK/ACT, PoE
ESD/EMP Protection: Air: ± 8 kV, Contact: ± 6 kV
Surge Protection: Different mode ±4 kv, Common mode ±6 kv
Operating Temperature: ‘-0°C ~ 40 °C
Operating Humidity: 5% ~ 90% non-condensing
Certifications: CE, FCC, IC
Energy Saving: IEEE 802.3az
PoE Interfaces: PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-), PoE+ IEEE 802.3bt (Pins 1, 2,4,5+; 3, 6,7,8-)
Max. PoE+ Wattage per Port by PSE: Port1-2 Max 90W；Port3-6 Max 32W
Voltage Range 802.3 Mode: DC55V
Q: How far can my IP camera connect with this switch?
A: It is 100 meters with standard IEEE802 network. You can add PoE extender to increase the PoE distance without breaking IEEE802.3 standard.
Q: What is the Max. PoE power budget per port?
A: It is 95W through port #1 and #2. The rest of the PoE port support 32W maximum. The actual PoE budget also depends on your IP devices. If the IP devices is compatible with IEEE802.3af standard, The visual PoE switch will only output 14.4W. The PoE switch can output 95W only if the front-end IP devices is compatible with IEEE802.3bt.
Q:I have devices that are not powered by POE and need direct connection to power supply, can I connect them to this switch ? or is it only for POE devices?
A: Devices that do not support IEEE 802.3af/at standard can use this switch for data transmission, but can’t powered by this switch.
Q:Hello, could you please tell me how noisy this switch is ? I intend to buy one for home so I’d like a device as quiet as possible.
A: It is fanless PoE switch which has no noisy at all.
Q:Does this support single mode or multi mode fiber connection?
A: The switch supports both single mode and multi mode fiber connection. Single mode or multi mode depends on what kind of transceivers you use.
+ What is included
- 1. 802.3bt PoE Switch
- 2. User Guid
Do you have any questions or concerns?
How to build a PoE network system for high powered devices?
Power hungry applications have been used in office and home widely, therefore the demands of new high power PoE are increasing, which means advanced PoE technology and standard are urgenly needed for providing steadier power and network to these power hungry IP devices. Thankfully, you’re not completely out of luck, you can find cost-saving and safe solutions in Fastcabling, meanwhile, the solutions we provide is also suitable for your existing non-PoE system.Read more